Introduction:
1. The distance between emitters can be varied to meet the irrigation demands of different crops, so that it can save water and increase output to the largest extent.
2. Special labyrinth type design on emitter makes users control dripping quantity through water supply pressure according to actual water quantity needed by the crop,and make dripping volume even for each emitters on a fixed length.
Feature:
1. The emitter has automatic filtering window, anti-blocking capacity is good.
2. It adopts turbulent flow passage design, water dripping volume is stable.
3. Water outflow cavity with large section which improves the ability of anti-blocking.
4. The dripper space has wide range of choice.
5. The inline flat dripper has been installed before leaving factory, which reduces the dripper installation fee and lowers the cost.
6. The paving length of the inline flat emitter type drip irrigation tape can reach up to 120 mm.
7. The characteristic of anti-corrosion is excellent.
8. The distance between the emitters can be adjusted according to the actual needs.
Application: widely used in many fields, such as cropland, garden and greenhouse etc.
Specifications
| Diameter |
Thickness |
Emitter
Spacing |
Flow Rate |
Working Pressure |
Packing |
| 16mm |
0.2mm |
15-30cm |
1-3L/H |
0.5-1.2Bar |
2000m/roll |
| 16mm |
0.3mm |
15-30cm |
1-3L/H |
0.5-1.2Bar |
2000m/roll |
| 16mm |
0.4mm |
15-30cm |
1-3L/H |
0.5-1.2Bar |
1000m/roll |
| 16mm |
0.6mm |
15-30cm |
2-3L/H |
0.5-1.2Bar |
500m/roll |
| 16mm |
0.8mm |
15-30cm |
2-3L/H |
0.5-1.2Bar |
500m/roll |
){kind=link}
){kind=link}