KEYFUN Safety Helmets:
Safety helmet to absorb the impact energy released, then hats will produce some damage or damage to the cap shell and cap liner, even if the damage is not immediately found, the proposed replacement been subjected to severe impact helmets. In order to ensure adequate protection performance, safety helmets should be adjusted to fit the head size. Please be aware, in addition to the helmet manufacturer's recommended changes and remove the parts, any change or remove any of the original parts are likely to cause danger. Helmets should not add any non-helmet with the manufacturer's recommended attachments. Prohibit the use of the helmet recommended by the manufacturer of paint, solvents, adhesives or labels. In order to ensure effective protection, visor should forward (straight direction) through the rear of the helmet ratchet adjustment system (size: 53-63cm), adjust the helmet to adapt them to head size (not too loose or squeeze).
Safety Helmet Prohibition
Prohibited other than those specified in the above description the case using this product. Safety helmets life affected by many factors, such as cold, heat, chemicals, sunlight and improper use. Daily checks to be done to identify helmets, accessories cap lining and brittle cracks, blemishes and other signs. If the helmet been hit or wear should be replaced immediately. If not defective, then the helmet can be used. Date of manufacture marked on the inside of each cap. In the case of normal use, for the first time use, the helmet will offer two to three years of effective protection; Or five years after production can provide effective protection. This helmet does not contain substances that cause allergic reactions. If an allergic reaction to sensitive populations, should leave the danger zone, took off his helmet, consult a doctor.
Safety Helmet Storage Instructions
If you no longer use or products in transit, safety helmet should be stored in a cool dry place, away from light frost. Avoid chemicals or sharp objects falling on it, causing damage to the helmet deformation.
Safety Helmet Cleaning / Care Instructions
This helmet can be moistened with a low concentration of detergent cloth. DO NOT use any abrasive, corrosive chemicals. If the helmet can not use this method to clean, replace it.
| Item |
Safety helmet |
| Item No: |
SH009 |
| Material: |
PE |
| Color: |
White, blue, yellow, green, red |
| OEM |
Yes |
| Customized: |
Accepted |
| Sample: |
Free sample could be provide,but the freight should be paid by customers. |
Audited Supplier 
){kind=link}